MENU

Menu

Konference

2011

2011

6. – 9. 6. 2011, Znojmo

FSI VUT Brno

Modelling of materials with shape memory effect with using finite element method

Michal Ackermann, Lukas Capek

An identification of material low cycle fatigue parameters

Impact force identification on sandwich beam

Jan Bartošek, Tomáš Kroupa, Robert Zemčík, Vladislav Laš

Integral Equation Method for Ring-Core Residual Stress Measurement

Adam Civín, Miloš Vlk, Petr Navrátil

Recent Application Capabilities of X-ray Diffraction Technique for Residual Stress Measurements in Materials Science and Industry

Study of FGD Gypsum Mechanical Properties – Before and After Recycling

Andrea Hájková, Pavel Padevět, Tomáš Plachý, Hana Němcová, Pavel Tesárek

Experimental Analysis of Residual Stresses in Backup Roll and FE solution

Radim Halama, Pavel Macura, Luboš Pečenka, František Fojtík, Michal Šofer

Computer simulation of the displacement of the speckle field due to 2D translation of the object and its evaluation by speckle correlation method

Ivana Hamarová, Petr Šmíd, Pavel Horváth, Miroslav Hrabovský

Identification of Impact Resistance of Plastics for the Purposes of FE Computations

Measuring and quality evaluation of Printed circuit board development

Lubomír Houfek, Petr Krejčí

Experimental Measurements of the Forces in the Screws

Martin Houfek, Vladimír Fuis, Lubomír Houfek

Optical Methods in Experimental Mechanics

Miroslav Hrabovsky

Mathematization of the death-moment determination process of laboratory biological material

Ján Ivanka, Silvie Bělašková

Analysis of the Environment Accuracy and How it Influences Measurement Results Performed in the Near Zone

Ján Ivanka, Petr Navrátil

Experimental Methods for Evaluation of the Energy Balance in Vicinity of the Crack Tip

Ivan Jandejsek, Daniel Vavřík

Accuracy Testing of the DIC Optical Measuring Method the ARAMIS System by GOM

Přemysl Janíček, Marek Blažo, Petr Navrátil, Tomáš Návrat, Petr Vosynek

Investigation of Camshafts after Machining Using X-ray Diffraction and Barkhausen Noise Analysis

Kamil Kolařík, Nikolaj Ganev, Jan Jersák

Operation Test of a New Experimental Technology for Research of Lateral Pressure

Petr Koudelka, Jaroslav Valach, Jan Bryscejn

Response of a building under wind loading

Plastic behavior in shear and degradation of shear modulus of textile composite materials with simple plain weave

Tomáš Kroupa, Jan Krystek, Hana Srbová, Petr Janda

Strength analysis of unidirectional carbon fibre reinforced plastic under biaxial loading

Jan Krystek, Radek Kottner, Tomáš Kroup, Vladislav Laš

Mechanical properties degradation of a glass fibre laminates under cyclic tension

Vladislav Laš, Petr Měšťánek, Matěj Hraška, Jan Cagáň

Measurement of Properties of a Sandwich Material Specimen

Aleš Lufinka, Petr Horník

The Application of Photostress Method for Experimental Stress Analysis of Plate Transducer

Pavel Macura, František Fojtík

Mathematical Method of Shooting Capability Evaluation

Investigation of response of composite plate subjected to low-velocity impact

Tomáš Mandys, Tomáš Kroupa, Vladislav Laš, Robert Zemčík, Jan Bartošek

Creating a Model of Cancellous Bone Tissue

Petr Marcián, Libor Borák, Zdeněk Florian, Martin Vašek, Ondřej Konečný, Petr Navrátil

Viscoelastic Behaviour of Carbon Black Filled Rubber

Bohdana Marvalova, Jitka Jagrova, Jiri Kafka, Jarmil Vlach

Modelling of moving load effect

Beams from the Glued Laminated Timber with the High Performance Lamellas and their FEM Models

Lenka Melzerová, Petr Kuklík

Analysis of compressive forces on rolls of a pipe conveyor

Peter Michalik, Vieroslav Molnár, Gabriel Fedorko, Jozef Zajac, Sławomir Luściński, Michal Hatala, Peter Monka, Vladimir Simkulet, Imrich Orlovský

Adaptive Control of TITO System Using Delta Model

Petr Navrátil, Ján Ivanka

Influence of stress waves to cracked railroad wheel

Petr Navrátil, Petr Marcián, Adam Civín, Zbyněk Dostál

Nondestructive determination of mechanical properties of the flue gas desulphurization gypsum

Hana Němcová, Tomáš Plachý, Andrea Hájková, Pavel Tesárek, Michal Polák

Methods of Micromechanics and Nanoindentation Applied to Heterogeneous Structural Materials

Jiří Němeček, Vlastimil Králík, Jaroslav Vondřejc, Jitka Němečková

Experimental and numerical determination of relative slips in a contact under fretting conditions

Martin Nesládek, Jiří Kuželka, Jan Růžička, Josef Jurenka, Miroslav Španiel

Evaluation of thermo-mechanical fatigue test based on FEM simulation

Ctirad Novotný, Miroslav Španiel, Milan Dvořák

Everything you always wanted to know about stress but were afraid to ask

Miloslav Okrouhlík

Influence of Humidity Environment on the Fracture Energy of Cement Paste

Pavel Padevět, Petr Bittnar

Applying High Order Statistics Analysis at Non Destructive Evaluation of Concrete Tiles

Lubos Pazdera, Jaroslav Smutny, Libor Topolar

Determination of Poisson’s Ratio of Gypsum Materials

Tomáš Plachý, Hana Němcová, Pavel Tesárek, Andrea Hájková, Michal Polák

Tensile stress of thin ceramic layers measured by Fizeau interferometry

Michal Pochmon, Tomáš Rössler, Miroslav Hrabovský, Armin Dellert, Ondřej Hýbl, Gerd Häusler

Multibody Models of the Triple Hybrid Hydrogen Fuel Cell Bus and Their Experimental Verification

Pavel Polach, Jaroslav Václavík

Degradation of Material Mechanical Properties and Its Evaluation Using Miniature Test Specimens

Pavel Polach, Josef Volák, Petr Kindelmann, Michal Hajžman

Effect of temperature treatment on mechanical properties of amorphous boron carbide thin films

Radim Čtvrtlík, Valeriy Kulikovsky

Long-time Monitoring of the Bridge Response Caused by Heavy Traffic and Temperature Changes

Michal Polák, Tomáš Rotter, Tomáš Plachý

Experimental Measurement of Performance Characteristics of Infra-Red Emitters

Antonín Potěšil

Sterilization Decomposition Evaluation of Radiolucent Composite Materials for Use in Medicine

Miroslav Sochor, Karel Balík, Tomáš Suchý, Radek Sedláček, Zbyněk Sucharda, Jan Beneš, Josef Prokop

Flexural capacity of the CFRP prestressed concrete slabs subjected to sustained & fatigue loading

Radoslav Sovják, Petr Máca, Jiří Litoš, Petr Konvalinka

Effect of Porosity on Mechanical Properties of High Strength Gypsum

Pavel Tesárek, Andrea Hájková, Hana Němcová, Pavla Ryparová, Tomáš Plachý

The Creation of Finite Element Model by Using the Digital Image Correlation Method

František Trebuňa, Róbert Huňady

Experimental Stress Analysis of Casting Pedestal and Proposals for Increasing of Its Lifespan

František Trebuňa, František Šimčák, Jozef Bocko, Miroslav Pástor, Ingrid Delyová

Verification Possibilities of Safe Operation of Pipe Yards on Compressor Stations by the Methods of Experimental Mechanics

František Trebuňa, František Šimčák, Jozef Bocko, Peter Trebuňa, Miroslav Pástor

Verification of Safe Operation of Hydraulic Power Station Stop Logs

František Trebuňa, František Šimčák, Juraj Gašinec, Patrik Šarga, Zdenko Bobovský

Improvement of Fatigue Life of Steel Orthotropic Desks with Carbon Fibre Reinforcement Composites

Shota Urushadze, Ladislav Frýba, Miroš Pirner

Investigation of the Adhesive Joints on the Tram Roof

Karel Doubrava, Ctirad Novotný, Milan Růžička, Zdeněk Padovec

Improved precision of stereometric measurement of relief’s surface by means of structured light enhanced photometric stereo method

Jaroslav Valach, Jan Bryscejn

Portable Testing Device for In-situ Testing of Building Material

Daniel Vavřík, Ivan Jandejsek

Regression Model of the Hole Drilling Principle for the Stress State Identification

Design of Experimental Device for Loading the Femur When Standing on One Leg

Petr Vosynek, Tomáš Návrat, Petr Krejčí, Lubomír Houfek

Analysis of residual stresses in plastics using digital image correlation

Robert Zemčík, Josef Boháč, Jaroslav Kaiser, František Plánička

Measurement of Water Uptake of Historic Surfaces - State of the Art Review

Evolution of Cement Paste Strength in Tension and Compression for Temperatures up to 300 °C

Ondřej Zobal, Pavel Padevět

Investigation of C/PPS Composites Degradation Process Using Acoustic Measurement

Tomáš Fíla, Jaroslav Valach, Daniel Kytýř, Martin Šperl

Numerical Analysis of Shallow Cast-in-Place Headed Studs Behaviour in Tension

Jindřich Fornůsek, Petr Konvalinka, John J. Cairns

Microplastic Limit of Steel Determined by the Measurement of Changes in Electrical Impedance

Ľubomír Gajdoš, Martin Šperl, Jaroslav Kaiser, Václav Mentl

Copyright | Všechna práva vyhrazena | www.experimentalni-mechanika.cz | Tvorba: GLIPS